MATERIALS

The wellCAMdent Milling Center cuts in all materials available for prosthetics. We mill materials such as: chromium-cobalt, titanium, zirconium oxide, PMMA.

Zirconium oxide is a material for prosthetic restorations where aesthetics and high bending strength are the most important (depending on the manufacturer from 800-1400MPa). Translucency is similar to the patient’s own teeth, and high biocompatibility eliminates the risk of allergic reactions.
A wide range of colors according to the Vita shade guide allows you to achieve a perfect color effect. Our offer includes zirconium oxide with varying degrees of translucency, thanks to which we are able to mask unfavorable discoloration of pillars and metal inserts. We also mill highly aesthetic full-contour crowns.

Titanium is a metal that is completely corrosion-resistant and, at the same time, the most biocompatible material in contact with the patient’s tissues. Low thermal conductivity ensures that the patient with titanium restoration is pain-free due to temperature differences. The restorations are resistant to mechanical deformation and are lighter than metal.
Machining of titanium in dental prosthetics is most often used in milling individual abutments made of titanium and zirconium abutments with a titanium base, as well as extensive work on implants.Obróbka tytanu w protetyce stomatologicznej jest najczęściej wykorzystywana we frezowaniu łączników indywidualnych wykonanych z tytanu oraz łączników cyrkonowych z bazą tytanową, a także rozległych prac na implantach.

The chromium-cobalt alloy is the most popular alloy used in modern prosthetics. It has good corrosion resistance, plasticity and high modulus of elasticity. We make Co-Cr prosthetic foundations from powder in the additive technique on laser sinter (SLM). Thanks to the most modern technologies and work on German machines and raw materials, we can adjust our offer to the requirements of our customers.

PMMA – biocompatible acrylic polymer – is ideal for temporary restorations and as a prototype to determine the occlusion height or shape of the teeth on hybrid bridges. Its main advantage is the reduction of shrinkage to 0.02% during polymerization.

COMPATIBLE IMPLANT SYSTEMS

Bridges screwed on with a no-hex implant are compatible with the following systems:

  •  AB,
  • Adin Touareq,
  • Alphabio,
  • Astra Osseospeed,
  • Bego Semados,
  • Biomet 3i Certain,
  • Biomet 3i Osseotite,
  • Implant Direct,
  • MIS Seven,
  • Nobel Biocare Active,
  • Nobel Biocare Replace,
  • Nobel Biocare Brannemark,
  • Osstem TS,
    Straumann Bone Level,
    Zimmer Tapered Screw,
    Mozograu,
    ICX,
    Densply Xive/Frialit,
    Dentium Superline,
    Camlog,
    Conelog,
    Neobiotech.

Works from the multiunit level (beams, bridges) are compatible with the following systems:

  • Nobel Biocare Active,
  • Nobel Biocare Replace,
  • Nobel Biocare Brannemark,
  • MIS Seven, V3, M4, C1.

Thermal expansion coefficient (VAK) for some of the materials in our offer:

  • Co-Cr SLM Scheftner – 14,4,
  • Co-Cr milled Scheftner – 14,1,
  • CoS DISC BASIC milled – 14,2,
  • MoguCera C milled – 14,8.

Contact us

We provide you with information and support at every stage of work.

+48 794 794 740